BMA Female Brass Bulkhead Microstrip RF Coaxial Connector
The BMA series represents a category of blind mate connectors,
meticulously crafted in adherence to the IEC1169-33 standard.
Distinguished by an innovative spring plate design, these
connectors ensure dependable contact and exhibit enhanced
electrical properties. A key benefit lies in their capability for
both axial and radial floating, coupled with minimal spacing
between individual contacts and a lightweight composition,
rendering them ideal for application in the blind mating of chassis
enclosures.
Widely utilized in modular connections for chassis cabinets, the
BMA series boasts interchangeability with international
counterparts, facilitating swift engagement and disengagement
procedures. These connectors are prevalent in the realm of radio
equipment and instrumentation, where they serve to establish
reliable connections for coaxial cables.
Specification
Note:The specific data of the model are based on the data in the
product specification sheet.
| Electrical Characteristics |
| Impedance | 50Ohm |
| Frequency Range | DC~18GHz |
| Rated Voltage | 250 VRMS (Maximum sea-level) |
| Dielectrics Voltage-resistance | 1000 VRMS (Maximum sea-level) |
| Insulation Resistance | ≥5000MOhm |
| Contact Resistance | Outer conductor | ≤2.0mOhm |
| Center conductor | ≤0.5mOhm |
| VSMR | ≤1.3 |
Product Detail
| Material & Mechanical Characteristics |
| Center Conductor | Male/Plug | Brass | Gold plated |
| Female/Socket | Sn-P bronze | Gold plated |
| Resilience Contact | Beryllium bronze | Nickel Plated |
| Shell / Housing | Brass, stainless steel | Nickel Plated |
| Insulators | PTFE |
| Sealing Ring | Silicone Rubber |
| Durability | 500 cycles |
| RoHS Compliant | Yes |
| Mating Cycles | 500Cycles |
| Contact Retention | 10N min |
| Cable Retention | 100N min |
| Mating Force | 0.6N max |
| Un-Coupling Force | 0.6 N max |
Environmental Specification:
| Operating Temperature | -55 to +155Deg C |
| IP Rating ( Mated ) | IP64 |
Features:
1. Connection methods: common welding type, snap type and so on.
Welded connection is firm and reliable, suitable for long-term use;
snap type is easy to quickly insert and remove, suitable for
frequent connection and disconnection of the scene.
2. Holding force: the center pin holding force is better, to ensure
that the connector will not be easily loosened or fall off in the
process of use, for example, there are BMA connector center pin
holding force greater than 20N.
3. Durability: long mechanical life, generally can withstand a
minimum of 500 times the number of plugging and unplugging, some
high-quality products are more durable.
4. Compact size: BMA connector is a miniature push-in connector,
compact size, suitable for equipment with limited space.
Application:
1. Communication field: In communication base station, it is used
to connect RF module, antenna and other equipments to realize the
transmission of high frequency signal. Its good electrical
performance and mechanical stability can ensure stable transmission
of communication signals, reduce signal loss and interference, and
improve communication quality.
2. Radar system: In the radar system, it can be used to connect the
various components of the radar, such as transmitter, receiver,
antenna, etc., to realize the transmission of microwave signals. As
radar system requires high reliability and stability of signal
transmission, BMA female microstrip connector's small size, light
weight, good electrical performance and anti-vibration and
anti-shock ability enable it to meet the strict requirements of
radar system.
NOTE:
We have over 10,000 types of interconnect
products((BNC,TNC,MCX,MMCX,SMA,SSMA,SMB,SSMB,BMA,SBMA,SMC,SC,SMP,SSMP
ect.),), if the connector you are using is not found, please
contact us with your details.
